EN
Aluminum alloy A type telescopic ladder, mobile lifting platform ladder operation method
Date:2013/9/11

Aluminum alloy A type telescopic ladder, mobile lifting platform ladder operation method

1.The formation of the 1 single ladders or ladder and the ground is about 75 degree angle.

The 2 extension ladder, maintain certain distance with overlapped overlap. The ladder superposition distance 8 meters below the should be 75 cm above the overlap distance of 8 meters above the ladder, should be 110 cm above the.

3 lift the ladder, a hand grip handle in one hand and a rope lifting, palms must not be placed in the ladder steps, or lifting ladder have card finger injury may.

4 lift to the appropriate height, in ensuring the safety hook card on the rod, the ladder to the appropriate use of open width, lift light light down please rise.

5 to drop down the ladder, the both sides of the ladder is close to some, the ladder up a little, so that the fixing clips on the left on the face, and then decreased slowly. If the decline is not smooth, can in one hand and a rope, a hand gently rocking the ladder, ladder down until smooth.

6 herringbone lift and lifting platform should be at least 2 person operation, lifting 2 people at the same time pulls the rope, and light up the light down, more than 6 meters of ladder should be at least two people assisted operation, prevent the uneven force on both sides of the ladder barycenter offset dangerous backward side of the ladder.

7 lifting platform lifting or moving platform is forbidden to stand.

8 lifting platform with two activities on both sides of lifting fixing device, moves to gather them, lifting and work when you are open to the appropriate lock in fixed width.

9 lifting platform bottom with lockable universal mobile casters, work when you lock the casters, mobile unlock can move freely